Pond Armor

Call Directions Website Contact the establishment

Pond Armor Pond Shield is an epoxy pond liner designed for waterproofing a large variety of water features.

Easily applied and easy to maintain, for most applications, it can be applied using brush, roller or in some cases sprayed.

PRO TIP: Don’t rush the cure.You’ve prepped the surface, mixed your Pond Shield, and applied your coating. Now comes one...
10/14/2026

PRO TIP: Don’t rush the cure.

You’ve prepped the surface, mixed your Pond Shield, and applied your coating. Now comes one of the most important steps: patience.

Pond Shield requires a minimum of 24 hours to fully cure before introducing water under the specified curing conditions.

Filling your pond too soon can compromise the finished coating.

Give your project the time it needs before putting it into service.

Good results are worth the wait.

Good prep sets the foundation for a successful Pond Shield application.Surface Prep helps clean and etch concrete and ma...
10/10/2026

Good prep sets the foundation for a successful Pond Shield application.

Surface Prep helps clean and etch concrete and masonry surfaces before applying Pond Shield—and Stephen put it to work on his project:

“Prepped just before Pond Armor — worked great on smooth and porous surfaces.”

Proper surface preparation matters. Take the time to get the substrate ready before you coat.

It’s not just for ponds. 🌱🪷🫛From hydroponic systems to planters and other water features, Pond Shield provides a durable...
10/07/2026

It’s not just for ponds. 🌱🪷🫛

From hydroponic systems to planters and other water features, Pond Shield provides a durable, waterproof coating for projects where plants and water come together.

Once properly applied and fully cured, Pond Shield is plant safe—giving you a seamless waterproof barrier without limiting what you can build.

One coating system. Countless projects.

What are you building?

Spot something that needs attention? Fix it before adding water.Pinholes, thin spots, small gaps, or exposed substrate c...
10/03/2026

Spot something that needs attention? Fix it before adding water.

Pinholes, thin spots, small gaps, or exposed substrate can sometimes show up during your final inspection. The important part is catching and correcting them before the pond goes into service.

KB-07: Touch-Up & Corrections walks through what to look for, how to make corrections within the recoat window, and what to do if that window has already passed.

A careful final inspection now can help prevent problems later.

Read the Pond Shield Knowledge Base at PondArmor.com

From the Pond Armor Vault.A waterfall built to be enjoyed — and built to handle constant exposure to water.Pond Shield c...
09/30/2026

From the Pond Armor Vault.

A waterfall built to be enjoyed — and built to handle constant exposure to water.

Pond Shield creates a seamless, waterproof barrier for more than just ponds. Waterfalls, streams, fountains and other water features can all benefit from the same durable protection.

It’s not just for ponds. What are you building?

Made in the USA. Built for long-lasting protection.

Explore the complete Pond Armor product line at PondArmor.com

Don’t guess. Measure.Proper coating thickness is an important part of getting the best performance from Pond Shield. Dur...
09/26/2026

Don’t guess. Measure.

Proper coating thickness is an important part of getting the best performance from Pond Shield. During application, aim for a minimum wet film thickness of 10 mils — approximately the thickness of three sheets of paper.

Checking your thickness as you work can help you catch thin areas before the coating cures.

Want a closer look at proper coating thickness? Check out KB-05: Pond Shield Wet Film Thickness Guide in the Pond Shield Knowledge Base.

Link in bio.

There’s nothing better than seeing a project come back to life.This customer followed the Pond Shield application instru...
09/23/2026

There’s nothing better than seeing a project come back to life.

This customer followed the Pond Shield application instructions and transformed their fountain — giving it a brand-new look while taking care of the leak at the same time.

Have a Pond Shield project you’re proud of? We’d love to see it.

Learn more about Pond Shield at the link in our bio.

Don’t add water just yet.Once Pond Shield has been applied, take the time to inspect the finished coating for complete, ...
09/19/2026

Don’t add water just yet.

Once Pond Shield has been applied, take the time to inspect the finished coating for complete, even coverage. Look over the surface one section at a time and address any areas that may need attention before putting the project into service.

Made in the USA. Built for long-lasting protection.

Explore the complete Pond Armor Knowledge Base at PondArmor.com

Check out this awesome fountain from the Pond Armor Vault! In this situation, the owner wanted a more formal looking pon...
09/16/2026

Check out this awesome fountain from the Pond Armor Vault! In this situation, the owner wanted a more formal looking pond and chose black slate tile. Since the slate is porous to begin with it was decided that Pond Shield Clear would be used as the final coating to completely seal all of the tile. Any coating that was exposed above the water line was scuffed with a red Scotchbrite pad to dull the coating and give the final finish a more natural look.

Address

Service Area:
Santa Maria, CA

Opening Hours

Monday 8:30am - 4pm
Tuesday 8:30am - 4pm
Wednesday 8:30am - 4pm
Thursday 8:30am - 4pm
Friday 8:30am - 4pm

Telephone

+18059221300

Website

Alerts

Be the first to know and let us send you an email when Pond Armor posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Establishment

Send a message to Pond Armor:

Shortcuts

Share