Hawk's Custom Woodworks

01/20/2026

Got my european mount back and mounted on one of my plaques. Big shout out to Outtaseason Taxidermy for an awesome job, as usual, with doing the european mount. Check them out for all your taxidermy needs.

01/20/2026

Customer wanted to display his grandmother's grave marker. So I framed it out in eastern cedar, finished with lacquer, and put the hardware on it so it can be hung like a picture. $80

12/20/2025

What the customer wanted and what I made. Pine, black paint, christmas bulbs. For those who don't know, it is to resemble a drag racing staging lights aka christmas tree. $100

11/22/2025

What the customer wanted vs what I made. $175

07/24/2025

Customer bought a boat and wanted this swim platform refinished. It's teak wood and needed some tlc. Disassembled and sanded down to bare wood. Multiple coats of teak oil applied, all new hardware, and reassembled. $250

04/03/2025

FOR SALE
'The Empty Tomb', small rock is walnut, medium is poplar, and large is basswood. Side crosses are pine and middle (Jesus's) is bloodwood. Measurements are a touch over 11 in wide, 2 in deep, and around 9 1/4 in tall. $35 each, 10 available. If I sell out, I can make more, so no worries.

04/02/2025

For any horror film buffs, you'll like this one. For those who aren't a fan of horror, this is what a customer ordered. She wanted a replica of the real Annabelle case to display her antiquedoll in. The Annabelle movies are based off the doll in the side by side pic. Pine, stained aged barrel, lacquer finish, oil rubbed bronze hardware, magnetic closure, plexiglass in door, & LED remote controlled light inside, feet on bottom, & hanger on back. Tried to get as close as I could, all I had to go off was a picture and her dolls measurements. Case is 34 1/2 in Tall, 23 3/4 in Wide, 11 1/2 in Deep. $450

04/01/2025

Wrapped up a memorial plaque for a fallen friend/prior co-worker Andy Lansing. Poplar, epoxy finish. Lettering was carved with cnc and filled with black epoxy. Big shout out to Richard Estep and Kenny Estep for the donated cnc work. Tried to take a good Pic of the coin in case anyone was wondering about it. Plaque will be hung at RCI in the rollcall room. The plaque is donated.

03/25/2025

Made steps for our pup to get onto the bed so we don't have to keep picking him up and putting him down. 2 ft tall, 37 1/2 in long, 16 in deep, each step is 8 in high and 12 in deep top step is 13 1/2 in deep. 3/4 cabinet grade plywood, painted antique white, carpeted.

03/18/2025

03/18/2025

Customer ordered 3 queen sized floating bedframes with LED's. Only took pictures/videos of 2. Dark walnut stain, lacquer finish, black paint for base underneath and plywood on top. $1,000 for all 3. Shout out to my buddy Chris Phipps for helping install. Side note, those LED's do all kinds of things that's just like a demo setting.