Brad Close Brass Instrument Repair

Brad Close Brass Instrument Repair I'm here to shamelessly promote my repair business. If you need a slide job, valve tune-up or alignm

Bending some sackbut crooks.
10/12/2025

Bending some sackbut crooks.

Just finished this custom Bach 42 Meinlschmidt valve install.
10/12/2025

Just finished this custom Bach 42 Meinlschmidt valve install.

Here's the finished alto sackbut.
06/06/2024

Here's the finished alto sackbut.

The new shop is shaping up nicely.
05/02/2024

The new shop is shaping up nicely.

04/10/2024

Apologies if anyone has tried to call the shop in the last few days. It is taking awhile to transfer the phone number to my new location. You can still reach me by email as usual.

Another Drewelwecz tenor sackbut finished.
01/24/2024

Another Drewelwecz tenor sackbut finished.

Making some sackbut crooks.
01/24/2024

Making some sackbut crooks.

I recently finished building this contrabass sackbut in BBb. It is a copy of the one built by Georg Nicolaus Oller in 16...
01/08/2023

I recently finished building this contrabass sackbut in BBb. It is a copy of the one built by Georg Nicolaus Oller in 1639, which as far as I know is the only intact surviving contrabass sackbut. It sounds one octave below a tenor sackbut. The original has an extremely long slide with a long handle to reach the outer positions, and is somewhat unwieldy to play (to say the least). The request was made for this reproduction to have a double slide that's half the length of the original, to make it more playable, with side-by-side slide tubes. The slide crooks cross over each other at the end. I built this almost entirely out of red brass sheet with seamed tubes. The slide does utilize modern drawn tubing and chrome plating on the inner slide, though, for the sake of functionality.

This is a 2 valve tenor trombone I built for a customer. He requested independent valves with this specific type of comp...
05/19/2021

This is a 2 valve tenor trombone I built for a customer. He requested independent valves with this specific type of compact wrap. The valves are in F and G and the pitch can also be changed by swapping the 2 valve slides.

I finished building this about a year ago. Eb Contrabass trombone with screw-on 10 1/2" bell flare. .578" bore double sl...
05/10/2021

I finished building this about a year ago. Eb Contrabass trombone with screw-on 10 1/2" bell flare. .578" bore double slide.

Sometimes it's worth the extra effort to do a repair on a really special vintage instrument that's going to look authent...
02/24/2021

Sometimes it's worth the extra effort to do a repair on a really special vintage instrument that's going to look authentic, rather than just patching it back together. This Kruspe trombone was made from thin gauge red brass and German silver. The bell brace had been completely torn off from the slide receiver. The solution was to remove the broken brace tube, create a new one, and braze it onto the original German silver fl**ge. A lot of work, but after it's finished, you would be hard pressed to tell it had ever been damaged.

02/19/2021

Correlation is not causation. How often we hear this; but do we really hear it? I saw a post today from a musician who had his instrument worked on and now believes it is ruined. He had a part replaced, and now it doesn't work properly. How can that be? It was a brand new part. He assumed the new part caused the problem, because he didn't have the problem with the old part. But I looked carefully at what he wrote, and he had ALSO had a different but related part worked on, and I'd be willing to bet that's the actual problem.

Here's an example: A customer came to me and said the valve would get stuck on his sousaphone every time he blew air through it. I was of course skeptical; the air pressure you create when you play an instrument is actually pretty low, not enough to make a valve stick in place. So I asked him to demonstrate, and sure enough, the valve got stuck. I then noticed that the brace holding the leadpipe had come unsoldered. When he went to blow into the instrument, he was of course pushing on the mouthpiece with his face, and that was pushing the leadpipe, and with no brace to hold it in place, was exerting force on the valve casing, distorting it enough to make the valve freeze. Re-soldering the brace fixed the problem.

Sometimes you might think you know what's wrong with your horn, but it might not always be what you think. If you take it in for repair, always explain the problem and let the tech recommend the solution.

Address

3542 Foothill Boulevard
La Crescenta-Montrose, CA
91214

Telephone

+18189572448

Website

Alerts

Be the first to know and let us send you an email when Brad Close Brass Instrument Repair posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Establishment

Send a message to Brad Close Brass Instrument Repair:

Shortcuts

Share

Category