MK Fire Design

05/23/2026

It's been MONTHS!! I finally had one day I could sit and get these gold valve installed, new oil added and nitrogen charged. With the new spring rate this bike should handle way better! On to the front forks.

04/01/2026

Over the years I have had a fun time learning Adobe illustrator. With CNC work I have been able to create vectors no problem. When my son needed new graphics I knew it would be cheaper for me to design them and print them locally. My son wanted blue and orange for this bike. The front graphics are stock and still is decent shape. I designed the rear number plates, the front fender and front number plate. Designing and printing it at allowed me to keep this bike within budget. The 03 wr project is next!

03/21/2026

IMI oversized tank, this was for a 03wr. The shrouds had to be changed to a 03 - 05 yzf. Had to get a seat for a mid 2000's yz as well. Front fender is from a 2015 wr250f. Rear fender is a 03-05 yz250f. Blue from the tank forward and black from the seat back!

03/03/2026

Our carved versions allows us to make a budget flag with the same quality as our normal flags.

02/23/2026

Day one of the teardown. Suspension is about to get done next week. I plan to have some clips of that. Tires, chain, sprocket, full grease job, all fluid and hoses will be replaced! We started late but I think I can get it done before April!

01/30/2026

It's never a dull moment in the shop. My oldest destroyed this rear diff in his Hoss. It got replaced with a .racing rear diff.

01/22/2026

01/15/2026

These axes get sanded down to remove all the massive imperfections, then a hyper blend very fine finishing disc will remove all the small infections. I do not and will not polish these to a mirror finish. I am not a metal guy by any means. I finish with about 200 grit sandpaper on the DA so give it this uniform look before I laser it.