Pinwerks

Pinwerks Pinwerks from South Florida. Marcel's pinball restoration life, custom work, and related miscellany. Fun For all Ages.

Roadshow Pinball Machine by Bally Williams. In Good Working Condition.Price $4,350The playfield is in good shape for mo...
05/12/2026

Roadshow Pinball Machine by Bally Williams. In Good Working Condition.

Price $4,350

The playfield is in good shape for most of the part. Led lighting has been added. The Playfield has been stripped and cleaned with new rubbers added.

Machine has been serviced.

The cabinet is in good condition, it does have some scratches and wear on the Headbox and cabinet. Please refer to the pictures.

The plastics are in good condition.

The Ramps are good.

The translite is in good condition.

The display is all good. The photo could appear like it's defective but it is the refresh rate of the camera

Boards are all good.

Delivery.

We can offer a Door to Door service with pickup and delivery with a Specialized courier.

I can assist in the freight of the pinball to all interstates. Freight Charges are Door to Door and are on a Pallet. The pinball Machine will be wrapped and strapped. Pick Up and Inspection Welcome.

Please send me your info for an accurate quote.

Thank for looking

I’m happy with the progress I made yesterday
04/17/2026

I’m happy with the progress I made yesterday

I’m happy with the progress I made today.
04/16/2026

I’m happy with the progress I made today.

This rivet press wasn’t inexpensive. I purchased it a few years ago. But it sure is the correct tool for the job!
04/14/2026

This rivet press wasn’t inexpensive.
I purchased it a few years ago.
But it sure is the correct tool for the job!

I have for sale a Bally PL***OY. $5599This machine was restored and it is working 100%.A new reproduction backglass was ...
04/14/2026

I have for sale a Bally PL***OY. $5599
This machine was restored and it is working 100%.
A new reproduction backglass was installed in this pin.
Playfield is new (made by CPR) and has not been played except to test the mechanisms and switches.
The full set of plastics is also new.
Mechanisms (bumpers, drop target assembly, flippers, slingshots) were disassembled and cleaned before being installed on the new playfield.
Flippers were rebuilt with new parts (bats, buttons, cabinet switches, coil stops, eos switches, links/plungers).
Switches were cleaned with new caps installed where originally used.
All new bayonet lamp sockets were installed on the playfield (general and switched illumination).
LED bulbs were installed throughout the machine (behind the backglass, under the plastics, and on the bottom side of the playfield).
Drop targets and rubbers are new.
Bumper bodies, bumper caps, bumper skirts, and rollover lane guides are also new.
The backbox and lower cabinet were fully sanded, prepped, and repainted matching the original artwork. Original serial number from the factory ("EPB 16623") is stamped on the left side of the backbox and lower cabinet.
The interior is extremely clean and new labels were installed throughout.
Lamp driver board (LED compatible) and power supply board are new.
Displays are working 100% (no segments or digits missing or always on).
Sounds are clear.
Coin door skin was polished. The rear side was fully disassembled and the individual pieces were cleaned.
Metal side rails on the exterior of the lower cabinet are new.
Lockdown bar and other metal pieces on the exterior were polished.
Legs were repainted and they look like new.
The playfield glass is new.
Front door and backbox have locks with the corresponding keys. A plastic keychain is also included.
Original coin box is present.
This machine is programmed for free play.
Manual with the schematics is included.

It’s going back together. I hope for much progress over the upcoming weekend.
04/13/2026

It’s going back together.
I hope for much progress over the upcoming weekend.

I have for sale a Williams BIG GUNS pinball machine. $2750This pin is working without problems.Playfield looks nice. It ...
04/13/2026

I have for sale a Williams BIG GUNS pinball machine. $2750
This pin is working without problems.
Playfield looks nice. It was disassembled, cleaned, and new rubbers were installed. Most of the artwork was protected with mylar from the factory.
Translite is original and in very good condition.
Exterior was touched up and looks nice overall.
Interior is very clean.
The four flippers have new coil stops and links/plungers installed
Drop targets are new.
Front door and backbox have locks with the corresponding keys.
Machine is set for free play (coin box and coin mechs are present).
Original manual with the schematics is included.

Monster Bash small metal is being tumbled for a while. You gotta watch these from time to time. Sometimes those lids vib...
04/13/2026

Monster Bash small metal is being tumbled for a while.
You gotta watch these from time to time.
Sometimes those lids vibrate off.

The Monster Bash mummy mech has been cleaned and rebuilt. I really like these custom coil wrappers.
04/03/2026

The Monster Bash mummy mech has been cleaned and rebuilt.
I really like these custom coil wrappers.

04/02/2026

Monster Bash lighted apron

Address

Boca Raton, FL

Telephone

(754)2058364

Website

Alerts

Be the first to know and let us send you an email when Pinwerks posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Establishment

Send a message to Pinwerks:

Shortcuts

Share

Category