G and R Woodworks.

12/18/2021

08/26/2021

I made this cane using a Red Oak dowel, and for the handle I cut a 6 piece of 2 X 2 Oak board. This Walking cane stands 36 tall and weighs about 2 lbs. I cut most of the handle shape using a scroll saw, then I attached the handle to the dowel using a double ended lag screw and drilled the handle,

08/26/2021

This Walking/Hiking stick stands 48 inches tall, and weighs 1 lbs. It is a Poplar Dowel, I sanded it smooth. I used Blue, Yellow, Green, and Red Artist markers and drew the random wavy lines, and then I outlined them with Black . I added several coats of exterior grade polyurethane, and added a

08/26/2021

This Walking/ Hiking Cane is 36 tall, and weighs 2 lb. I removed the bark, and sanded it smooth. I drew some Skulls in pencil, and then I used a Black Artist Marker, and the areas between them I painted Black, I airbrushed a light Blue and White haze over the entire stick. I added the Brass Skull,

08/26/2021

To create this walking Cane I removed the bark from the stick, and cut to height. To make the handle I cut a piece of 2x2 with a scroll saw, I shaped it using an orbital sander and on occasion I attached it using a double ended screw 3 X 1/4 , and wood epoxy. I used a Black Artist marker, and drew

08/26/2021

I made this Birdhouse using poplar. This Birdhouse weighs 2 lbs 12 oz, It is 13 inches long, 10 inches high, 8 inches wide. I used a stencil and drew it in pencil, then I used a Black Artist marker to fill it in. I sprayed it with several coats of Gloss Polyurethane for protection.

08/26/2021

I used a wood dowel to make this Walking/ Hiking Stick. After sanding it smooth I taped in a spiral pattern, and outlined using pencil. I then taped again in a spiral going the other way to get the pattern I wanted. I wood burned all lines, and then a dot type pattern on one way, and vertical lines

08/26/2021

This walking stick stands 35 inches tall and weighs 2 lbs To create this I removed the bark from a branch and sanded it smooth I carved this design with carving tools (no rotary device) and painted it black. I used a White paint pen for the design. I finished with a marine grade urethane to

08/26/2021

To create this walking stick I removed the bark from a pine branch and sanded it smooth. I used Red and Blue Artist markers, I started at the bottom and circled around in both colors until I got to the top the natural wood color is close to white to make it look like a patriotic walking stick. I

08/26/2021

I sanded a Poplar dowel , and drew the multi color rings using Artist markers. I added several coats of exterior grade polyurethane. I added a leather strap, and a rubber tip for added traction and protection.