Strobe heaven

05/10/2021

UPD: Parduota

Lenco L75/L78 plinth
475x420x90

03/10/2021

Liquidation of discontinued stocks

videos of this strobe models reading:
https://youtu.be/PJgcQVmpcNc
https://youtu.be/EaYixLA9o5I
https://youtu.be/KsI1pw9O8GY

Emitting colours see on the last two pictures.

- all of strobes are based on microprocessor, controlled with precision quartz generator -

Worldwide shipping with registered priority airmail (with tracking) - 5 euros

Shipping inside Lithuania to address with Lietuvos Pastas or to Omniva / DPD parcel machine - 2.60 euros

Keychain strobes supplying from one 12v "23A" battery, battery included !!!

1. 100/120/300 hz strobe for "50", "60" and 300 hz strobe discs
LEDs are lighting while button holds depressed, release and depress button - changes frequency. Frequensy is indicated by colour of small LED (according colours of digits printed on enclosure)
26 euros per item

2. The same principle, but once depressed and released button starts LED illuminating for 20 seconds, if press button again while LEDs are lighting - frequency will changes to next one meaning, if press button after auto-off - lighting will starts with the same frequency
Discounted, 23 euros

3. The same principle as point 2, another enclosure, LED emitting colour - yellow
30 euros

6. Universal strobe with all 3 frequencies emitting in one time.
Emitting frequency of every "side" is shown on the label. Empowering from any wall USB charger or 5V PSU with the USB socket as well as from computer USB port (not included)
26 euros per 1

Payment with IBAN, PayPal, Paysera, Revolut are welcome.

18/02/2021

Garrard-301 - strobe set and pulley

A new series of stainless steel stroboscopic heads for mounting instead of the standard Garrard-301 mounting screw and microprocessor-based stroboscopic modules with quartz frequency stabilization 100.00 hertz (for the European standard Garrard platter of 50 hertz - with 180 marks). Standard versions of modules are available for mains voltage 220-240 volts or 100-117 volts 50/60 hertz. The modules provide smooth control of the brightness of the LED. The standard color of the LED is "neon lamp" = amber (orange).
The LED output is completely isolated from the mains (a standard certified mains transformer is installed inside the module), power stabilization is completely analog, there is no impulse noise, there is no risk of electric shock.
Heads with a fixing screw length of 10, 20, 30, 40 mm are available, which allows mounting the head into a plinth of any design.

It is possible to manufacture modules with a different frequency - 45, 120, 300 hertz or any other, as well as the choice of the color of the emitting LED

We also offer high quality pulleys for Garrard-301 made of steel with a mirror polished surface and a precision bore for the motor shaft for very reasonable price.
https://www.youtube.com/playlist?list=PL2YJcq3dd361orPQMgh03zVH0RaRHmNEp

18/01/2021

Solid pulley professionally made on the lathe - spare part for the Garrard 301

Videos of the pulley "in real life" is here
https://www.youtube.com/playlist?list=PL2YJcq3dd361orPQMgh03zVH0RaRHmNEp

- Hole made in 3 steps with the precision drills.

- Working surface polished on precision professional factory machine.

- Lowest disbalance due to low diameter of fitting screws and their appropriate lenght
(the same screw weight as weight of drilled-out steel)

- No chemical reaction with the rollers gum (steel is most chemically inert in comparison with the other metals)

- No electrochemical reaction with the motor shaft's steel - we use the same material to avoid shaft and pulley corrosion.

- Tight fit on the motor shaft but without heating and machine pressing

Standart Garrard 301 dimensions - the same as native pulley's.

01/12/2019

Strobe source 45Hz for Micro Seiki DDX-1000 project

And surrogate very-very hand-made light source )))) - as free gift
https://www.facebook.com/Strobeheaven/videos/2594668017269059/

Standalone quartz strobe 45.00 hz (8v up to 120mA peak) in wall power supply. Can drive 1 - 4 LEDs.
Mains switch - no need to detach from wall socket.
Cord length 1.8m
200mA fuse protected output.

For Micro Seiki DDX-1000 project.

23/11/2019

New turntable rpm-meter with clock is available as commertial product.
Lead-free solder, ROHS approved components. No additional chemistry used

Detecting method: IR reflective sensor and inverted to plate colour (black on silver or white/mirror on black) ONE mark with 1 ... 20 cm width, placed on surface perpendicular to sensor. It can be bottom of disk or any side - outer or inner.

Beogram version for 24 native marks usage are available too.

External power supply: 5VDC >=0.25A

Led display colour versions:
grass green (see video here)
https://www.facebook.com/Strobeheaven/videos/1132247396974915/

or paspberry red (see video here)
https://www.facebook.com/Strobeheaven/videos/568392830630803/

Digits height 20mm

Clock accuracy 1 sec per 24 hours

RPM accuracy 0.01 RPM

RPM count in real time: every turn

RPM measuring: 15.01 - 79.99

Available as DIY assembled set without enclosure
as well as ready for use standalone device complete set (coming soon)

Commertial product

Rights reserved,
microprocessor code protected.