Poornima Civil Engineering Group - PGI

05/01/2020

03/12/2019

Which Slab Is Better – Ribbed Slab Or Solid Slab (One Way Or Two Way): First of all, It depends on the use of the structure. Slabs are structural members forming floors and roofs in buildings. They may be solid of uniform thickness or ribbed with ribs running in one direction or two directions( wa...

03/12/2019

Checklist For Beam Shuttering: 1. Quality and physical appearance of shuttering material is good or not. The formwork surface should be clean. 2. Check if shuttering oil is properly applied to the shuttering material or not. 3. Check verticality of the beam shuttering using a plumb. 4. Check the lev...

03/12/2019

TMT BAR: The Full form of TMT is ‘Thermo Mechanical Treatment’ through which they are produced. TMT bars are manufactured by rolling hot steel wires and then passing them through water. TMT bars have a hard outer surface and a soft core inside, which helps in making the bars corrosion resistant ...

03/12/2019

In this article, I will discuss how to design One way slab with example. What Is One Way Slab? When a slab is supported on all four sides and the ratio of long span to short span is equal or greater than two, it will be considered as one way slab. The load on the …

03/12/2019

Tips To Reduce The Cost Of Building A House Admin | February 1, 2018 | CONSTRUCTION | 4 Comments The cost of building a house differs from plan to plan. It is always essential to provide economical design to the house owner. Civil engineers and architects use their professional experience and techn...

03/12/2019

Shotcrete is a mortar or concrete which is pneumatically projected or sprayed by a nozzle with high velocity on the prepared surface

03/12/2019

03/12/2019