RD WeldWorks

Directions

RD WeldWorks Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from RD WeldWorks, Arts & Crafts Store, Doncaster.

Have a look through what Iโ€™ve made for myself and customers alike and donโ€™t hesitate to get in touch with me for quotes or with any queries you may have๏ฟฝ
Cheers
Ross

Started to make myself a toolbox for taking out into production when Iโ€™m released onto the shop floor. Found that after ...
31/07/2022

Started to make myself a toolbox for taking out into production when Iโ€™m released onto the shop floor. Found that after making the rectangular parts of the frame that one was twisted so I used oxypropane to heat the joints up and clamp down to a flat surface.

More to follow this week with the addition of an internal shelf and hopefully some side panels and wheels.

Keep em peeled!๐Ÿ‘€๐Ÿ˜Ž

Rear seat conversion recently done in this VW Caddy Maxi ๐Ÿ‘Œ๐Ÿป had to take bits of material off the panels to make them fit...
03/07/2022

Rear seat conversion recently done in this VW Caddy Maxi ๐Ÿ‘Œ๐Ÿป had to take bits of material off the panels to make them fit nicer and then was able to weld them in๐Ÿ˜Ž Thanks Mark ๐Ÿ˜

17/06/2022

Had nicer jobs to do in this kind of heat ๐Ÿ˜‚๐Ÿ˜ฎโ€๐Ÿ’จ

Made this Spartan helmet as a โ€œthank youโ€ for the hard work from the guys at Art Fusion 13 last weekend. They always put...
10/06/2022

Made this Spartan helmet as a โ€œthank youโ€ for the hard work from the guys at Art Fusion 13 last weekend. They always put in amazing effort with all the designs and tattoos they produce so
I canโ€™t recommend them enough ๐Ÿ‘Œ๐Ÿป

This one was made from Propshaft tube, a differential component, cam chain and round bar. The base was made from a differential cap from a lorry and a piece of twisted steel for the helmet to sit on๐Ÿ˜Ž

Really enjoyed making this one and it came out wicked ๐Ÿ˜Ž

30/05/2022

Hi guys!

Would just like to thank each and every single one of you who has viewed, liked and shared anything on here as this really means a lot to me ๐Ÿ˜Š

Now, Iโ€™m wondering if anyone has any scrap steel theyโ€™re looking to get rid of? I can collect but bare in mind I only have a small car๐Ÿ˜… anything from boxes of old rusty bolts to horse shoes etc basically anything basically made from steel ๐Ÿ‘Œ๐Ÿป

Cheers guys! ๐Ÿ˜

Customer came to me as they wanted a contraption that will crush chicken bones. They sent diagrams over of the image the...
28/05/2022

Customer came to me as they wanted a contraption that will crush chicken bones. They sent diagrams over of the image they had in their head and I made it a reality ๐Ÿ˜Ž

Left a gap in the middle and the spikes at the side are different spaces so the customer is able to put 2 chicken legs on at once with adequate space ๐Ÿ‘Œ๐Ÿป

I can do projects that have a practical use as well as sculptural art so if you can think of anything that you might be able to make use of but canโ€™t find anywhere please get in touch!๐Ÿ˜

Found a couple of nice โ€œaeroโ€ holes tonight ๐Ÿ˜‚ just need to take the front half of the carpet and the dash out along with...
24/05/2022

Found a couple of nice โ€œaeroโ€ holes tonight ๐Ÿ˜‚ just need to take the front half of the carpet and the dash out along with the headliner before I can start prepping the metal (if any๐Ÿซฃ) for welding ๐Ÿ˜

Work has commenced tonight to strip my 1989 VW Polo - as you can see it needs loads of welding doing!๐Ÿ˜‚ The pictures on t...
23/05/2022

Work has commenced tonight to strip my 1989 VW Polo - as you can see it needs loads of welding doing!๐Ÿ˜‚

The pictures on this post donโ€™t even show half of the welding that needs to be done but I will be posting progress for all to see ๐Ÿ‘Œ๐Ÿป

Job completed for another happy customer๐Ÿ˜ got sent the photo for reference and was completed in an evening ๐Ÿ˜Ž If you have...
16/05/2022

Job completed for another happy customer๐Ÿ˜ got sent the photo for reference and was completed in an evening ๐Ÿ˜Ž

If you have seen any of these posts and like something youโ€™ve seen please donโ€™t hesitate to get in touch ๐Ÿ˜

This is the start of a little wagon project for myself. Off cuts of 3mm plate, propshaft tubing and round bar along with...
16/05/2022

This is the start of a little wagon project for myself. Off cuts of 3mm plate, propshaft tubing and round bar along with a few nuts and bolts to secure the wheels on.

Work in progress but coming out great so far ๐Ÿ˜

Address

Doncaster
DN48BE

Website

Alerts

Be the first to know and let us send you an email when RD WeldWorks posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category