17/07/2026
4.3-inch IPS capacitive touch screen
Protection: Audio limiter, over-temperature, DC, high frequency, short circuit, back EMF, peak current limiter, surge current limiter, power-on delay, power circuit breaker protection, over-voltage/under-voltage protection
PC Software: Software controls media matrix, audio processor, DSP power amplifier, and active DSP module
Supports dual-backup debugging via buttons and touch screen
Supports TCP, UDP, USB, RS232, RS485 control
Supports per-channel monitoring of temperature, power, voltage, and current
Supports 4-in 4-out DSP processor
Signal sources: Analog input, sine wave input, pink noise input, white noise input, Dante digital audio input (optional module), AES digital audio input
Input sensitivity: 0dB, 6dB, 12dB selectable
Input gain: -60dB to +15dB adjustable
Input channels support phase selection
Input channels support mute function
Input channels support adjustable noise gate
Input channels support 31-band adjustable PEQ, BYPASS, high-pass/low-pass filters, copy, paste, and reset functions
Input channels support adjustable delay
Input/output channels support configurable routing, with arbitrary input channels and multi-channel output
Input channels can be routed to 2-way FIR filter outputs
Output channels can be routed to 2-way FIR filter inputs
Output channels support 10-band adjustable PEQ, BYPASS, high-pass/low-pass filters, copy, paste, and reset functions
Output channels support adjustable delay
Output channels support adjustable compressor
Output channels support adjustable limiter
Output gain: -60dB to +15dB adjustable
Supports 80 scene preset modes
Supports three languages: Simplified Chinese, Traditional Chinese, English
Remote power on/off module (optional)
Device supports remote power control via TCP/UDP protocol
Supports software management on PC, tablet, and mobile phone
Supports single-device and multi-device group centralized control via PC
Supports multi-device delayed power on/off via PC, with adjustable delay time
Device name and IP address can be modified via PC
Supports central control protocol
Supports RS485 serial connection
Power:
Output power per channel (A, B, C, D) at 8Ω (1% THD, 1kHz sine wave full power test): 2000W
Output power per channel (A, B, C, D) at 4Ω (1% THD, 1kHz sine wave full power test): 3300W
Output power per channel (A, B, C, D) at 2Ω (1% THD, 1kHz sine wave full power test): 4600W (not recommended)
Bridged output power per two channels (AB/CD) at 8Ω (1% THD, 1kHz sine wave full power test): 6600W
Bridged output power per two channels (AB/CD) at 4Ω (1% THD, 1kHz sine wave full power test): 9200W (not recommended)
Signal Interface: Balanced/AES, 4×XLR Female, 4×XLR Male
Input Impedance: 10kΩ unbalanced / 20kΩ balanced
Output Interface: 4×4-pole SpeakON, 8-pole SpeakON/8-pin twist-lock (compatible with L-Acoustics)
Maximum Input Level: 20dBu / 7.74V
Signal-to-Noise Ratio (A-weighted, full bandwidth): >100dB
Damping Factor (100Hz): >1000 @ 8Ω
Total Harmonic Distortion:
