Dan's 3D Print Lab

Home
Canada
Courtenay, BC
Dan's 3D Print Lab

Dan's 3D Print Lab is a 3D printing service that offers custom 3D printed lithophanes, sculptures, and parts.

I am locally based on Vancouver Island, and can print provided files from Thingiverse, or custom designed pieces by myself.

02/26/2024

Do you have a VR headset that awkwardly lives on your desk, or on the shelf, or even worse on the floor? Here is a simple but elegant solution to hang your headset on the wall with dedicated spots for the controllers and rubber headband! Compatibles with the Quest lineup of headsets, and comes with all required mounting hardware!

You can purchase this on my Etsy page, or if you are local to Moose Jaw contact me directly!

https://www.etsy.com/ca/listing/1324055227/oculus-quest-wall-mount-stand?click_key=a4f5da3a1540fb51c58be402718d6c5b78d9e067%3A1324055227&click_sum=d160dea1&ref=shop_home_active_1&sca=1

01/25/2023

Want a unique and fun Valentines gift? How about instead of a bouquet of roses you give your significant other an adorable Rose Dragon?! These dragons are fully articulating and super fun to play with an make for beautiful decorations around the house that is sure to be a conversation starter!

Tadling size dragons come with a keychain ring and can be attached to a backpack or keychain to go wherever you go!

Tadling - $10
Baby - $20
Adult - $30

All orders take 1-3 business days depending on demand. Reach out if you would like to order one of these for that special someone!

10/06/2022

I finally got around to printing this cute ghostie with feet! This is a very popular model made by ZOU3D and is printed with permission via their Patreon.

With the ability to stand on his own two feet, or even sit on a ledge this little guy is just adorable!

I have two sizes available - 2.5" and 3.75" tall. Both have an option to come with a keychain loop.

03/01/2022

I'm back! After a bit of a hiatus I am back with some new products! I have had a number of requests for a Death Star lamp, so I finally managed to create one! I have both a small Death Star that is the same size as the small moon and earth lamps I sell and is powered by a battery operated LED panel, as well as an ENORMOUS Death Star that is illuminated by a lightbulb cord and can be mounted as either a ceiling lamp or a table lamp!

Small Death Star lamps are $65 and come fully ready to go - just add 3 AA batteries!

Large Death Star lamp is $125 and comes with a lightbulb cord and a table mount if you select the table top option. Lightbulb is not included, but recommended use is a 60W LED bulb.

11/20/2021

It's that time of year again, and I once again have a custom 3D printed Christmas ornament for sale to celebrate the year that was. This year it is the year of the vaccine! Hang a small syringe on your tree this year as a small reminder of the year that was. These make great gifts and stocking stuffers!

Vaccine ornaments are $15 apiece, and shipping is available through my Etsy page!

10/18/2021

Anyone need a Halloween costume? Finally got around to printing some of the Squid Game show face masks. This is a super cool mask with a sleek design much like a fencing mask. The holes allow you to see through just fine, but completely obscures your face from the outside. Comes with straps for complete adjustability, one size fits all!

Price is $60 - I only have this one ready to go but will print more if there is demand. First come first serve!

05/11/2021

Get your personal image printed as a custom lithophane! This is a unique and beautiful way to showcase your images and make for incredibly thoughtful birthday, wedding or anniversary gifts!

Sizes and prices are as follows:
Small (160mm) = $25
Medium (180mm) = $30
Large (220mm) = $42.50
Extra Large (250mm) = $50.00
LED light and Mount = $12.50

Custom Text can be added to any image for an additional $5. Shipping options are available!

*Images must be 3x2 aspect ratio - any non-standard images will be cropped to this ratio
**Batteries not included

05/01/2021

New lithophane sizes and prices! And a brand new mounting system to boot!

I have slowly been tweaking the lithophane design to include a nice beveled border around the image, and have now designed a mounting system that allows you to have a LED puck light mounted behind your lithophane to showcase your image anywhere you like! Mounts come with an LED light included, and can cycle between white, red, green, and blue light by simply pushing on the entire light itself!

I also now have the ability to offer a GIANT extra large lithophane size that comes in at 250mm on the longest edge (approx 10"!). This is a positively massive print that looks truly incredible when illuminated!

Updated prices and sizes as follows:

Small (160mm) : $25
Medium (180mm) : $30
Large (220mm) : 42.50
Extra Large (250mm) : $50.00

Lithophane Mount and LED Light*: $12.50

Text can be added to any lithophane for an additional $5.

*batteries not included

Reach out on Facebook messenger, or order through my Etsy page!

04/10/2021

Well it had to be done, the moon lamp now exists in a giant version! This mammoth of a print was printed on my shiny new Ender 3 V2 that has a much larger build volume than my Prusa Mini, and is a whopping 210mm in diameter! To better illuminate this print and make it a more functional lamp I designed and printed a base that accepts a IKEA Hemma lightbulb socket. This allows me to install an LED bulb for increased brightness, and means I can hang it from the ceiling as a ceiling lamp, or have it sit on a table in this neat wireframe base I designed! Plug it in to a smart outlet and you can have a dimmable, color changing moon lamp!

This took over 3 days of continuous printing on my printer, and nearly half a roll of filament! I do offer them on my Etsy store for $95 plus shipping if you would like one for yourself! You can also purchase the STL files on Cults3D if you want to make your own!

03/09/2021

My latest creation! A light up globe of the earth! With accurate depictions of the continents, seas and oceans and some special additions such as a compass rose this is a super cool and unique bedside or accent light!

It is wirelessly controlled via remote and is full RGB to allow nearly any color, as well as several modes to automatically cycle through colors!

Takes 3 AAA for the lamp, and a watch battery for the remote.

$60 for local pickup in the Comox Valley, or available on my Etsy page for $65 (to cover fees).

Digital file is available on Cults3D if you want to print your own! https://cults3d.com/en/3d-model/art/light-up-earth-lithophane-lamp

02/05/2021

My latest pet project - a full model recreation of downtown Vancouver! This model is made up of 12 squares placed in a grid pattern to form the area of downtown Vancouver. The models are generated from actual LIDAR data of the city of Vancouver so this is actually a scale representation of the real city! Each square is 10cm by 10cm, so the overall size is 30cm x 40cm. This took ~75 hours to print, and was a super fun process to learn!

11/25/2020

Give 2020 the sendoff it deserves and celebrate this holiday season with your very own little dumpster fire!

No matter how you celebrate this holiday season, take a moment to remember the year that was with this 2020 Dumpster Fire ornament. Comes with twine and a mounting hole to hang on your tree, or can alternatively be used as a desk ornament to remind you of the year that was!

Ornaments are $20 apiece and are printed in green and orange PLA.

Address

Courtenay, BC

Website

https://www.etsy.com/ca/shop/Dans3dprintlab

Alerts

Be the first to know and let us send you an email when Dan's 3D Print Lab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Establishment

Send a message to Dan's 3D Print Lab:

Shortcuts

Want your establishment to be the top-listed Arts & Entertainment in Courtenay?