Arkangel Audio

Arkangel Audio Live sound reinforcement hire, Recording and mixing studio, Mastering, Composition services, Portable

What an awful lot of work to have my rear I/O on the front. 🫨 Next for this flight case: Custom 32A power delivery syste...
04/02/2026

What an awful lot of work to have my rear I/O on the front. 🫨

Next for this flight case: Custom 32A power delivery system with SPD out to triple 10a RCBO breakers for lower power Class A\B amps, and private stage power drop.

The goal: Have absolutely zero vacant power plugs available for greedy power gremlins to cause overload trips with, and eliminate the need for dizzy boxes (which careless grenlins also love to steal power from) Just two 32A lines straight from the generator.

The secondary 32A PDU will reside in the soon to be assembled large Class D amplifier flight case, to handle their max power handling.

Tidy!!! 2/4 flight cases loaded up, just need blanking plates and fans for these first two and the amplifier cases are t...
18/01/2026

Tidy!!! 2/4 flight cases loaded up, just need blanking plates and fans for these first two and the amplifier cases are tour ready!!!

Tidy strain relief 101Panel-Mount XLRs Built to Survive RealityMost XLR failures don’t happen at the connector.They happ...
18/01/2026

Tidy strain relief 101

Panel-Mount XLRs Built to Survive Reality

Most XLR failures don’t happen at the connector.
They happen behind it — where strain, vibration, and bad strain relief slowly murder the conductors.

This build eliminates that failure mode.

What This Is

A hand-engineered, multi-layer strain-relief system for panel-mount XLR connections, designed to permanently transfer mechanical load away from solder joints and into the connector body itself.

Not heatshrink-for-show.
Not tape-as-a-crutch.
Actual load-path engineering.

⸻

How It’s Built

Each assembly follows a controlled, repeatable process:
1. Precision soldering — clean joints, zero mechanical load
2. Individual terminal heatshrink — insulation + conductor support
3. Secondary heatshrink bundling — internal strain distribution
4. Progressive outer heatshrink layers — stiffness gradient, not a hard hinge
5. 3M cloth gaffer interface — vibration damping + surface bonding
6. Final resin-lined encapsulation — bonded to the XLR barrel, not the wires

Result:
A flexible, compliant core with a bonded structural shell — the same principle used in molded industrial cable boots.

One rack built, four to go, just need to plug up the IEC13’s in.. oh, and install some fans and blanking plates. 💁‍♀️
12/01/2026

One rack built, four to go, just need to plug up the IEC13’s in.. oh, and install some fans and blanking plates. 💁‍♀️

Something about prior planning…..
12/01/2026

Something about prior planning…..

Workin on the rigs!!First outing for Baby Banshee. Cabs to be renovated and repainted before their next day in the sun…N...
15/07/2023

Workin on the rigs!!

First outing for Baby Banshee.

Cabs to be renovated and repainted before their next day in the sun…

Not pictured, my fourth child Derek.

REP 2023.

Ellie Walsh Photography

New location taking shape, Panels up!!
14/09/2021

New location taking shape, Panels up!!

07/09/2021

Arkangel audio has moved to a new location and to celebrate so am breathing life into my Old Mac Pro, literally by cleaning it, more than just a little bit of dust…

If you are lazy like me you can put all your system fans and heat sinks in the dishwasher, I also did my keyboard 😂

09/08/2021

Hot off the press!

Recently added some speakon NL4’s, built up some F-F Speakon cables and drew up an electrical block diagram for these fu...
09/08/2021

Recently added some speakon NL4’s, built up some F-F Speakon cables and drew up an electrical block diagram for these funky homemade crossovers that where added to the boxes back in 1988 to a set of old EV Dominator all-horns. these were originally tri-amped back in the day, meaning that each driver had a discrete connection to its own independent amplification module. The upgrade brings these boxes into the current standard of amplifier interfacing for Party Hire Profound Sound & Lighting’s PA rig!

Watch this space.... As of Just now, I have Purchased 27000watts of Amplification and am awaiting quotes on precut timbe...
30/06/2021

Watch this space.... As of Just now, I have Purchased 27000watts of Amplification and am awaiting quotes on precut timber for cabinets and a set of 6 B&C 18SW115 Subwoofer Drivers.

that's 13500 watts RMS and 27000 watts Program of TAPPED HORN BASS!!!

Bit of an amp fix up for the Coastal Underground crew, retrieval of broken XLR and rebuild of patch lead 🙂 Had to pull t...
25/06/2021

Bit of an amp fix up for the Coastal Underground crew, retrieval of broken XLR and rebuild of patch lead 🙂

Had to pull the whole amp board out to get the leverage to pull this tricky fella off.

Address

Brisbane, QLD
4018

Telephone

0424466114

Website

Alerts

Be the first to know and let us send you an email when Arkangel Audio posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Establishment

Send a message to Arkangel Audio:

Shortcuts

Share

Category