Lots of rad projects moving along and even more incoming.
Engine machine shop
Cylinder head rebuilds
Vehicle repairs and vehicle builds
Lots of rad projects moving along and even more incoming.
Have spots opening up for more engine rebuilds! Economical pricing starting at
$1250 + parts 4cyl
$1500 + parts 6cyl
$1750 + parts 8cyl
(Prices may vary depending on core condition and build goals)
Also always have openings for cylinder head refresh/rebuilds with FAST turnaround times
(1-3 days in most cases depending on parts availability)
Hottank, inspection, resurface, blasting of valves, valve job and valve stem seal replacement starting at
$275 for 4cyl
$350 for 6cyl
$400 for 8cyl
(Aluminum cylinder heads)
Iron cylinder head services available as well for an additional fee.
Busy busy busy! Multiple in progress and new projects underway. Picture dump of Subaru FA20, Chevy lt1 v8, honda F20b/H22, couple walk-in cylinder head jobs(which I always have openings for and quick turnaround time!), hyundai veloster 1.6t, Chevy 454, and my own frankenstein for the turbo prelude.
Supercharged 9th gen Si in for some preventative maintenance. And another F/H series frankenstein in process for my 4th gen turbo prelude.
Always a variety of projects underway with even more in the works, everything from small 4 cylinders to big block V8s.
Extras liquidation sale!
I've managed to accumulate alot of extra parts and need to make space for more projects.
Shipping available on cylinder heads and smaller items at buyers expense!
Will be updating as parts are cleaned and inspected. Will make package deals as well!
1. H22A4 cylinder head $350 with fresh valve job, hottank and resurface
2. J32a3/J35a6 cylinder heads bare castings
I have 2-3 sets in stock will be hottanked and resurfaced $200 a pair
3. F22A sohc non vtec cylinder head complete with valve cover, hottanked, valve job and resurface $250
4. F22B sohc non vtec cylinder head with valve cover, hottank, valve job and resurface $250
5. 1 set of oem sandblasted RCA J SERIES lower runners $75
6. 1 oem sandblasted J32A3 upper intake plenum with butterfly valves and actuator $50
7. 1 set of FERREA 35mm INTAKE VALVES 6000 SERIES HONDA ACURA J30 J32 J35 J37 F7860 $220
8. Oem honda optional car Telephone unit $150
9. 1 F22b sohc vtec Engine, pulled from wrecked vehicle has fully ported head, locked vtec and ported intake manifold, rings gapped for turbo application, 3-5k miles on rebuild, has lightweight clutch and flywheel on it as well as many new sensors distributor etc. $700
10. 1 H22a4 engine pulled from running vehicle years ago burned oil could use a rebuild $450
11. 1 engine wiring harness from 94/95 accord sohc vtec $100
12. 1 sandblasted oem J35a6 upper intake plenum $100
13. 1 jdm 5th gen accord/5th gen prelude steering wheel has alittle wear but still in good shape $150
14. 1 brand new eBay gt30 t3/t4 turbocharger $175
15. 1 set of struts and lowering springs from RD1 honda crv $150
16. 2 newer abs cv axles from a 5th gen accord manual trans $75
My own on-going side project, 4th gen prelude Si turbo. Far from done but a solid start. Keep an eye out for more updates to come, everything from clean up to testing of different H/F series engine combos.
Shout out to my customers past, present, future, returning etc. I appreciate each and every one of you. Working with a wide variety of vehicles and engines isn't always easy but I wouldn't change a minute of it. Looking forward to the new year getting into even more builds and learning experiences.
Merry Christmas everyone!
Squeezing in another quick project, 9th gen civic si for kraftwerks supercharger install with a whole bundle of supporting mods.
Few general notes at the moment:
●Currently booked up into February already●
☆Any new incoming vehicles need to have appointment set up ahead of time
☆German vehicle policy: I will rebuild those engines if removed from vehicle and brought in but I will not be doing any wrenching on the vehicles themselves (zero exceptions)
☆Still have some vehicle part outs on going with a number of 94-97 accord parts, shipping is available on smaller items
☆Still open 7 days a week 10am-7pm
☆To my past, current and future customers thank you for your business!
Full vehicle part outs
No catalytic converters available
Not looking to sell any of these whole
Located in copley Ohio. Shipping available on smaller items.
☆97 accord ex sedan green
136k f22b1 sohc vtec 5 speed manual swapped
Either jumped time or needs new valves.
Pretty clean leather interior other than a tear in the driver seat.
☆06 Acura TL base auto 3.2
Vehicle has electrical and immobilizer issues.
Fresh J32a3 3.2 engine with less than 6k miles
Has new rings, bearings, gaskets, ported heads and lower intake runners, 05 acura RL cams, engine was recently running when pulled from other car and very reliable (has made it with zero issues across country and back)
Auto transmission with 140k~
Seats and interior panels not available
Newer base brakes (no brembos)
☆94 accord wagon
F22b1 vtec sohc 5 speed
Engine has 3k miles with fresh rings, bearings, gaskets, arp head studs, ported intake manifold and cylinder head with locked vtec.
Innovative solid engine/ trans mounts
Transmission is not available
Wheels are pending sale
No front body panels available, interior is kinda beat.
5 lug conversion with newer brakes
Happy Thanksgiving everyone!! 🦃🦃🦃
We work with a wide variety of makes and models. Everything from daily drivers to race cars and everything in between. Here is a few of our projects and our customers projects/builds.
Throwback to a set of jseries cylinder heads that got the full treatment..
Here we have a 1980 Z28 camaro, out of a long storage this classic will get alittle cleaning and a refresh. Current owner snagged it in 1987 as his first vehicle and put a few miles on, at one point it got a rebuild with larger pistons, camshaft etc. Should be pretty healthy after we are wrapped up with it!
Another busy week with lots of work on current and incoming projects. Everything from minor repairs to builds we have you covered.
If you are looking for ported components, rebuild services or even small repairs we have you covered. With 15+ years experience servicing and modifying most makes/models and engine configurations we are prepared to help with your next project big or small!
We work with a wide variety of makes,models and engine configurations. Everything from daily, mild street car to purpose built race car. If you need a hand with that project we are here to help.
Hope everyone has a good memorial day. Here are some shots of recent jobs that came through the shop this week.
Third set of ported jseries cylinder heads in the last 2weeks.. ported intake runners, ported and polished exhaust runners, reground seats, valve job. Next on to resurfacing, cc'ing, and new seals everywhere.
It has been another good week at Never Sleep Performance and Fabrication our sr20det engine build is running pretty good and looking awesome. The supercharged ep3 si got its rebuilt heart installed and first start up. The wagons fresh ~12.5:1 compression with locked vtec f22b fired up with solid oil pressure and no smoking. The monte carlo engine is out and being prepped for rebuild, as well as a few cylinder head jobs
Wagon day at Never Sleep Performance and Fabrication everything from replacing original parts dated 1978 on a classic LTD, to fixing some extreme fitment issues from a previous owner on the turbo accord wagon.
Variety of projects in the works including full 5 lug conversion on the accord wagon restoration, cylinder head refreshed for a supercharged ep3 while we await tooling to hone the block, porting/polishing on some j series cylinder heads along with machining and porting throttle bodys. Also the h23 prelude got alittle love.
Keep us in mind for those projects big and small, from mechanical to port work and machining we have you covered.
Some of our current projects include K20A3 rebuild, accord wagon restoration/build, an 87 monte carlo ss aerocoupe that needs an engine refresh, and even my newest addition a h23 non vtec honda prelude. Stay tuned for updates and progress on these projects and many more.
Don't forget we always have openings and package discounts on ported items!!
Some of our work over the past few days including some more J series manifold sets, some engine builds and vehicle repairs.
Stay tuned for more progress and projects coming soon.
Local guy stopped by with his 73 Plymouth satellite with a built small block. Clean car!
We work on them all old or new!
Another in stock split J35 manifold with butterflys Intact, throughly ported, polished and blended inside. Sandblasted/painted top cover and lower half, Bare finish on upper cover topped off with our zinc coated hardware. This unit is available for immediate shipping
Price is $400 plus shipping/paypal fees
Always j series honda stuff happening here...
About time to knock the dust off and drag the J swap wagon to the shop. Keep an eye out for updates on this project coming soon...
Here at NSP we love all builds, wether you have a street car, track car, or wild one-off project, There's absolutely nothing we can't do to help your build progress or make more power... &d
Many products and services available for your next build, project or even daily driver. From ported goods (with many Honda J series items in-stock), to machine work, and even some mechanical work.
-Towing services available through Rubber City Towing.
-Vehicle Tuning services available through SleepyD Racing
J series honda ported "clamshell" intake manifold. 72mm throttle neck. Textured surface.
Some projects and jobs we've had over the past week including Subaru cylinder heads resurface, Gsr head rebuild, some fuel rail modification for injector fitment, Supercharged ep3 si for engine tear down inspection and rebuild, Chevy hhr ss for turbo, water pump replacement and inspection, also finally made a new sign for the build.
Anddd new business cards!
Just doing stuff here at and a cracked subaru head😖 Don't miss our 20% off porting sale 💪💪 let us know how we can help you get your race car or show car ready for the season🌄
One of the many services we offer is sandblasting. A good way to clean up that dingy engine bay and also a good way of prepping parts for paint. Package deals available for multiple parts. Fast turnaround!
Hot tank services available for those gunked up messy parts, cylinder heads start off at $40 per head, $50 on engine blocks.
Any disassembly/reassembly is extra.
Fast turn around times! Openings available!
Pictured below is a before and after on a subaru cylinder head that came fresh from the local salvage yard.
1466 Jacoby Road
Be the first to know and let us send you an email when Never Sleep Performance and Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.
Send a message to Never Sleep Performance and Fabrication: