13/08/2024
乙骨憂太&里香的舞台照~順道來個里香Making Part 2~ The Stage Photo of Yuta & Rika of Jujutsu Kaisen and a brief description of the making process of Rika. (English Version below)
這次里香的製作由於本體尺寸太大，除了手部有造紙模外，其他部分都是腦內3D建模，製作的過程完全沒有需要重複的工序，每個步驟都很有新鮮感，有問題就動腦筋解決，這種製作過程我十分享受喔🥰
里香主要的材料是EVA(約5米)和泡棉然後上色，不是汽球~ 總重量大約10kg不算重，整體製作沒有想像中困難，上色用噴槍除了花錢外沒有毛病。最困難的部分其實是說服自己打消『把里香的手製成可動』的想法🤣是能做到，可是運輸就會變成最大難題了，所以算了吧......關於舞台表演實在十分對不起小黑(夏油)，練習時的打鬥動作90%做不到，沒辦法是里香不讓我做🥹
For the making of Rika, but due to the large size of her main body, except for the hand which was made with paper modeling, the rest was all done through 3D modeling in my mind. The production process did not require much repetitive steps, each step felt fresh, I thoroughly enjoyed this kind of production process. 😊
The main materials for Rika are EVA (around 5m) and foam, which were then colored, she isn't made of balloons. With a total weight of around 10kg, it's not too heavy. Overall, the making wasn't as difficult as I had imagined. Using a spray gun for coloring was a bit expensive but felt good. The most challenging part was actually convincing myself to abandon the idea of making Rika's hands controllable. 😂 It was doable, but transporting it would then become a major challenge, so I decided against it... 🤔
呪術廻戦Jujutsu Kaisen．乙骨憂太&祈本里香
Photo thanks
IG .photo2021
IG
IG
半專業攝影團
宗虎式
![[祈本里香Making Part 1]最近咒術停刊了但我的里香進度良好，差不多要完成了⋯⋯但是！！！為什麼我有AI里香還要造實物？！我自己也不懂啊🫠距離完成尚有一半路程！[Making of Rika Orimoto Part 1]Why ...](https://img4.glartent.com/041/941/1043981610419415.jpg)
