MWT Modellbauwerkstatt-Trape

MWT Modellbauwerkstatt-Trape Design and creation of custom parts for your scale car Model according your request.
- Turned & mille
(9)

Lotus 72D Pocher base (INSTRUMENT PANEL)CAD files of the new instrument panel . All parts are made new. No Pocher parts ...
21/12/2023

Lotus 72D Pocher base (INSTRUMENT PANEL)
CAD files of the new instrument panel . All parts are made new. No Pocher parts will be used here. Main instrument board is done from etched parts (soldered from multi pieces). Instruments are machined and backside switchboxes are 3d printed. CAD files do not show all the wires and hoses. Also decals are still missing. I will show pictures of the model parts later during the WIP.

Lotus 72D Pocher base.  (FUEL PUMP SYSTEM)All parts are made new. No Pocher parts are used hereCAD files of the new fuel...
21/12/2023

Lotus 72D Pocher base. (FUEL PUMP SYSTEM)
All parts are made new. No Pocher parts are used here
CAD files of the new fuel pump system (behind the cockpit). New base plate (black parts) are all etched parts soldered together. Most of the other parts are machined parts. All wires and hoses not displayed in the CAD files. (I will show pics of the model parts later during the WIP)

Lotus 72D (Pocher base) NEW DFV ENGINE.A few shots of the CAD engine  drawings.As mentioned before, i will make a second...
21/12/2023

Lotus 72D (Pocher base) NEW DFV ENGINE.
A few shots of the CAD engine drawings.
As mentioned before, i will make a second engine on display next to the finished car. All new, no Pocher parts used)
For stability nevertheless i will use the Pocher main engine block parts on the car model itself and only substitude all accessories (Pumps, Intakes, electronics,...) on it.
The new engine and subassemblies will be made from 3d printed parts, machined and etched parts. A total of over 800 parts just for the engine.
I will show the model parts later during the build. Here only some pics of the CAD drawings. All parts that are reproduced will be seperate parts as on the real car incl .nuts and bolts.
All CAD drawings for the car are completed and most parts are 3d printed and machined. Also all etched parts are made. Now the building phase will continue (on a slow basis due to other additional tasks)

Lotus 72D (scale 1/8) - Pocher base superdetailing-I am superdetailing the Pocher Lotus 72D. Almost all kit parts from t...
20/12/2023

Lotus 72D (scale 1/8) - Pocher base superdetailing-

I am superdetailing the Pocher Lotus 72D. Almost all kit parts from the Pocher kit will be modified or replaced.
- over 600 new machined parts up to now
- several hundred 3d printed parts and etched parts.

All CAD work is completed incl. a complete new engine model that will be set as a seperate engine next to the car on display.

I will show a WIP in the next month.
There might be some detail sets in 2024 for this car. But due to complexity these will be not that detailed as this build. All not decided yet, untill this build is completed.

BMW Airhead engine (WIP) - 1975     (today DIODENBOARD).. continued on the electronic housing of the airhead.   Still mo...
06/03/2023

BMW Airhead engine (WIP) - 1975 (today DIODENBOARD)
.. continued on the electronic housing of the airhead. Still most of the wiring still missing (To starter motor).
Components of electronic housing all complete now.

Next will be the main housing of the engine block and crankshaft.

SNEAK PEAK of next custom build (still under development) - BMW Airhead motorcycle engine (dash 5 / 6) - 1975Complet new...
03/03/2023

SNEAK PEAK of next custom build (still under development)
- BMW Airhead motorcycle engine (dash 5 / 6) - 1975

Complet new design (no base kit) ; all internals present but not funktional
Mix of 3d printed parts, machined parts, etched parts, hardware parts,...

Showinf first progress of CAD design and first test build of electronic / alternator area.

Autograph Transkit for Pocher 1299s is SOLD!!!!
02/02/2023

Autograph Transkit for Pocher 1299s is SOLD!!!!

1x Autograph Transkit for Pocher Ducati 1299S (HK107 or HK110) for sale!!Production number - 001 -.  (MINT CONDITION)I a...
02/02/2023

1x Autograph Transkit for Pocher Ducati 1299S (HK107 or HK110) for sale!!
Production number - 001 -. (MINT CONDITION)

I am offering the first number ( 001) of the Autograph transkit to superdetail the Pocher Ducati Panigale 1299S (HK107 or HK110). Scale 1/4.
The Transkit is sold out and was limited to 100 transkits. All Transkits were numbered (on box and on etched display plaque on the etched sheet.)
This transkit i am offering is the number 001.
I initially kept this transkit for own use in the future. But due to loads of other tasks and orders i do not see me using this transkit in the future. So i am letting it go.
First come first serve.
For further information (detailed parts list and instruction manual) visit the Autograph model web shop. You can download the manuals as pdf there.
http://www.autographmodel.com/shop/mediafiles/Sonstiges/DB00%20Anhang.pdf
http://www.autographmodel.com/shop/mediafiles/Sonstiges/E000%20Instructions.pdf

Asking price is 1500,-€ plus shipping cost to your country.
Payment can be done by bank transfer (EU only) or PayPal (world-wide)
If paying with PayPal please add 5% to the final sales price to compensate the fees.

This transkit is sold out and will not be reproduced.

If you are interested please contact me here with PM or send me a mail to: [email protected]

Suzuki RG500 1978 (scale 1/9)exhaust system - part 2 (painting)- exhaust pipes painted acc. reference pictures. (rusty) ...
23/01/2023

Suzuki RG500 1978 (scale 1/9)

exhaust system - part 2 (painting)

- exhaust pipes painted acc. reference pictures. (rusty) :-)
- pipes installed to engine and frame.

still missing the exhaust springs

Suzuki RG500 (1978) - scale 1/9exhaust system modification (part 1)- kit represents a mk3 (XR22) style setup- i will con...
18/01/2023

Suzuki RG500 (1978) - scale 1/9
exhaust system modification (part 1)

- kit represents a mk3 (XR22) style setup
- i will convert to a mk4 (XR27) style setup

exhaust tips are machined new for upper and lower tubes (different design)

- added further details as new frame mounting strap, weld-lines and front exhaust tips spring mounts.
..next will be the painting process

Suzuki RG500 (1978) 1/9 scaleengine build completed, wired and mounted to frame.- added more bolts and plugs to the engi...
10/01/2023

Suzuki RG500 (1978) 1/9 scale

engine build completed, wired and mounted to frame.

- added more bolts and plugs to the engine
- added the water hoses (3x)
- added ignition coils (incl. electric positive and negativ connections)
- added ignition wires
- added fuel lines from carburators (3 each)
- added clutch cable
- added RPM connection wire
- added some electric wires

Now concentrating on rear wheel mount.

Suzuki RG500 (1978) (1/9 scale)engine progress and 3d printed chainmore details added to engine (still a lot details mis...
05/01/2023

Suzuki RG500 (1978) (1/9 scale)

engine progress and 3d printed chain

more details added to engine (still a lot details missing)
3d printed a new chain
front and rear sprocket also completly new

Suzuki RG500 (1978) scale 1/9 (Barry Sheene)Engine build progress- complete new engine (no part from italeri kit used)- ...
04/01/2023

Suzuki RG500 (1978) scale 1/9 (Barry Sheene)

Engine build progress

- complete new engine (no part from italeri kit used)
- all CAD designed
- made from 3d printed parts, machined parts, etched parts,...

WIP.. Main parts assembled, next are engine sub-assemblies and connections.

Single projectSuzuki RG500 (1978) scale 1/9 (Barry Sheene)Heavily modified Italeri kit.- over 100 new machined parts- se...
02/01/2023

Single project
Suzuki RG500 (1978) scale 1/9 (Barry Sheene)

Heavily modified Italeri kit.
- over 100 new machined parts
- several 3d printed parts
- brass framework
- new instrument cluster (scratch)
- suspension (front & rear) all machined new
- over 100 custom etched parts

only a few kit parts will be used
engine will be 100% new. (3d printed, machined, etched,...)

1299R Final Edition Transkit for Pocher kit (scale 1/4) about to be finished. Test build is almost  complete. Here you s...
15/11/2022

1299R Final Edition Transkit for Pocher kit (scale 1/4) about to be finished.
Test build is almost complete. Here you see some progress pictures of the current stage. All details and part information can be seen on the "Autograph model" homepage.
https://shop.autographmodel.com/Autograph-Transkit-fuer-Pocher-1-4-Modellbausatz-HK117-Ducati-1299-Panigale-R-Final-Edition

The Transkit will include over 1000 new parts and is similar to the previous Transkit for the 1299 S bike. New parts are made from machined parts, resin parts, white metal casting parts, brass casting parts, 3d printed parts, new nuts, bolts, washers, several hunderd etched parts, and all new wires, hoses and cabels. transkit also includes several decal and sticker sheets to upgrade and replace the pocher decals.

The transkit is intended to be released by end of this year. Please see all updates on the "Autograph" website. Ordering will only be possible on the "Autograph" website.

The shown pictures only show a small part of the complete transkit. Pictures below still show in incomplete building progress. On the seen pictures still a lot of wiring and details are missing.

Autograph transkit:1299R Final Edition for Pocher kit (1/4).Test build progress.- steering damper upgrade (pocher kit ha...
28/09/2022

Autograph transkit:
1299R Final Edition for Pocher kit (1/4).
Test build progress.
- steering damper upgrade (pocher kit has wrong design (for 1299s)

UPDATE:Upcoming "Autograph" transkit for the Ducati 1299R Final Edition from Pocher (scale 1/4).Further Test-build of th...
14/09/2022

UPDATE:
Upcoming "Autograph" transkit for the Ducati 1299R Final Edition from Pocher (scale 1/4).
Further Test-build of the Transkit.
- Finishing Cooling system with hoses and clamps.
- Adding ignition box
Expect release of the transkit "ready to order" in december 2022.
ORder will only be possible at the "Autograph" web shop. More progress will be shown there in the next days.
https://shop.autographmodel.com/Autograph-Transkit-for...

UPDATE:Upcoming "Autograph" transkit for the Ducati 1299R Final Edition from Pocher (scale 1/4).Testbuild of the Transki...
13/09/2022

UPDATE:
Upcoming "Autograph" transkit for the Ducati 1299R Final Edition from Pocher (scale 1/4).
Testbuild of the Transkit.
Today:
Different sub-assemblies
(Rear frame, Heatshield exhaust, Cooling system)
The transkit will provide 2 complete new coolers. Pocher kit has the lower cooler molded to the frame bracket only, )
New coolers made of resin parts, etched parts and white metal)

UPDATE:Upcoming "Autograph" transkit for the Ducati 1299R Final Edition from Pocher (scale 1/4).Testbuild of the Transki...
09/09/2022

UPDATE:
Upcoming "Autograph" transkit for the Ducati 1299R Final Edition from Pocher (scale 1/4).
Testbuild of the Transkit.
Exhaust and Intake unit mounted to the engine.
New steering rack for the FInal Edition test mounted to the Main frame (Airbox).

Expect release of the transkit "ready to order" in december 2022.
ORder will only be possible at the "Autograph" web shop. More progress will be shown there in the next days.
https://shop.autographmodel.com/Autograph-Transkit-for-Pocher-1-4-model-kit-HK117-Ducati-1299-Panigale-R-Final-Edition

26/06/2022

SOLD!!!!

All 288GTO kits are sold. (except for a few that are still reserved and discussed with the customers).

288GTO - Last kit to offer.I have 1x kit for direct sale. A customer stepped back from his reservation.  Price is 998,-€...
26/06/2022

288GTO - Last kit to offer.
I have 1x kit for direct sale. A customer stepped back from his reservation.
Price is 998,-€ (plus shipping)
I ship worldwide.
Payment can be done with bank transfer (only inside EU) or PayPal (worldwide). For PayPal payment consider a 5% add on to the total price to compensate the fee.

Do not wait too long as this is the LAST KIT to offer. All other kits are sold or already reserved.

Parts list and instruction manual can be downloaded from my website:
https://www.modellbauwerkstatt-trape.de/downloads/

SHIPPMENT WILL START MID TO END OF JUNE 2022!!!!I finally got the confirmation of production for the missing etching par...
18/05/2022

SHIPPMENT WILL START MID TO END OF JUNE 2022!!!!
I finally got the confirmation of production for the missing etching parts from my supplier and will receive the parts soon.
Since i am currently also on vacation and not be back in office till early june, i can now confirm that the 288GTO engine kit (2nd production run) will be ready for sale and shipping mid to end of june.
THE FINAL KIT PRICE IS 998,-€ (+shipping)
If payment is intended with paypal then please add 5% to compensate the paypal fees (or send money as friend as option to save the fee). EU-orders are also able to pay with bank transfer.

I will contact every person that had preordered the kit.

Best regards,
Michael

Update: 288GTO engine kit (second production run):Dear customers,I like to inform everyone that preordered this engine k...
05/04/2022

Update: 288GTO engine kit (second production run):

Dear customers,
I like to inform everyone that preordered this engine kit, to expect a delay in the release date. Initially (January) it was expected to have the kits ready to ship by end of April 2022.
Due to the still unexpected high amount of orders at my supplier for etching parts i have to expect a delay in delivery of these etching parts.
They still try to "squeeze" me in between too receive the missing parts soon but can't promise me this.

This is to inform everyone preordered this kit that a delay is possible up to July 2022.
Everything else from the kit is finished and packed already in the box (Resin parts, machined parts, hardware parts, decals, gaskets, instruction manual, miscellaneous parts) - just missing the etched parts.

I am very sorry for this delay but i can not change anything about it. I hope everyone will accept this delay. All preorders for this kit are still valid and i will contact each customer about this delay in the next days.

Best regards,
Michael

sneak peak:Autograph transkit for the Pocher 1299R Final Edition.  (scale 1/4)- Exhaust system finished.All parts and de...
04/04/2022

sneak peak:
Autograph transkit for the Pocher 1299R Final Edition. (scale 1/4)
- Exhaust system finished.

All parts and details shown below are part of the upcomming transkit from the company "Autograph" using the "Pocher" parts as a base.
Shown here just the exhaust system. The transkit will cover the complete bike (as before released with the transkit for the Pocher 1299S Panigale)
Transkit to be released in Q4/2022.

Sneak Peak of the upcoming "Autograph" transkit for the "Pocher Ducati 1299R Final Edition" .Modified exhaust system.The...
03/04/2022

Sneak Peak of the upcoming "Autograph" transkit for the "Pocher Ducati 1299R Final Edition" .
Modified exhaust system.
The transkit will add a lot of details to the very basic Pocher kit parts. exhaust parts. This modification will require a new painting for the exhaust parts. new decals for the exhaust system will be included in the transkit. (includimg additional exhaust decals that are not included in the Pocher kit)

Shown pictures still show only an intermediate build progress of the exhaust system.
Still missing are the endcovers of the 2 exhausts, the exhaust valve setting unit, lambda sensors and wiring...... Also some color adjustments to follow.

22/03/2022
Announcement:New release of "Autograph Model" Transkit for the  Ducati 1299R Final Edition from Pocher in scale 1/4.This...
22/03/2022

Announcement:

New release of "Autograph Model" Transkit for the Ducati 1299R Final Edition from Pocher in scale 1/4.
This Transkit is currently in development and planned to be ready for sale at end of the year 2022.
price tbd.

The transkit will have the same amount of detail as the previous Transkit for the 1299S adjusted for the 1299R Final edition.

Special "Final edition" changes include:
- new parts for the exhaust system
- correct upper steering bridge (incl. limited edition stickers to make your own seriel number visual)
- corrected damper system for front and rear suspension
- ...

Autograph model web shop:
https://shop.autographmodel.com/startseite

Transkit currently not to order until development completed.
Once ready, orders are only possible on "Autograph web shop" (link above)

The planned amount of reservations for the second production run of the 288GTO engine kit has already been reached. So i...
12/01/2022

The planned amount of reservations for the second production run of the 288GTO engine kit has already been reached. So i can not accept any more orders at this time. A third production run is not intended!!!

Hello everyoneDue to the many requests i am still receiving about this kitI am doing a reiissue on the 288GTO enguine ki...
10/01/2022

Hello everyone

Due to the many requests i am still receiving about this kit
I am doing a reiissue on the 288GTO enguine kit (scale 1/4).
It will be an even smaller production run as the first one. So i expect this to be sold out very quick again.

Due to work load also by some supllier companies expect the kit be ready in about 3 month. (Early April)

Nevertheless i will accept pre-orders from now on.
(payment when kit is ready to ship).

Contact me here (PM) or on my website.

Expect the price to rise a few Euros since some parts and suppliers published higher prices this year.
I still hope to stay below 1000,-€ as a final price. I will publish the final price as soon i have the information from all suppliers.

I hope that all the people that were not lucky on the first run are now be able to order a set.

...continued WIP on the 288GTO engine- clutch parts completed- clutch installedThe 2 clutch discs and 2 pressure plates ...
08/01/2022

...continued WIP on the 288GTO engine

- clutch parts completed
- clutch installed

The 2 clutch discs and 2 pressure plates were mounted and attached in the housing. All secured with 8x washers and nuts (M2,0)
Still missing are the timing marker marking.
The clutch discs are barely visible after mounting.

Only items missing to finish the engine is the right wiring loom and the 2 cross pipes on top of the engine.

I will leave both timing belt covers off to keep the belts visible.

...continued WIP 288GTO engine- The engine is on the stand!!! :-)  finally. Stand was soldered (soft soldered) and paint...
03/01/2022

...continued WIP 288GTO engine

- The engine is on the stand!!! :-)
finally. Stand was soldered (soft soldered) and painted red after priming. (used regular gloss red from a can). Still some decals missing but have not decided which to use.
- additinally finished the alternator and monted the rear brackets for the (optional) rear cover.
- made one of the clutch discs. (2 required)
2 pressure plates and the clutch housing cover missing. Once this is mounted the cluch parts will be hardly visible anymore.

...continued WIP 288GTO engine- installing main alternator cable and mounting clamp- installing climate compressor- inst...
01/01/2022

...continued WIP 288GTO engine

- installing main alternator cable and mounting clamp
- installing climate compressor
- installing drive belts of alternator and climate compressor
- installing fuel lines and injectors (right side)
- preparing hose clamps for water lines

next to do is finishing the hose clamps for water lines
installing the alternator brackets for rear cover and making the wire harness for the right engine side.
Engine stand is soldered and now ready to get painted.
Last step is to add the clutch assembly

...continued WIP 288GTO engine kit- throttle unit (right side)- fuel injectors and fuel line connections (left side)- fi...
01/01/2022

...continued WIP 288GTO engine kit

- throttle unit (right side)
- fuel injectors and fuel line connections (left side)
- finished wiring (left side)

HAPPY NEW YEAR EVERYBODY 😀😀😀

--continued WIP 288GTO engine kit- making of tensioners of the drive belts & installing back cover plate- strating main ...
29/12/2021

--continued WIP 288GTO engine kit

- making of tensioners of the drive belts & installing back cover plate
- strating main wiring looms (shown left side)
- installing throttle unit (left side)
- painting the clutch pads (etched parts)

The making of the throttle unit will be shown when doingthe right side. The clutch pad is painted using rubberblack as a base and then (while still not dry) spraying mist coats of different grey, beige and black coats from distance using spray cans. (really just a quick burst). This process is repeated until happy. All paints are matt.
Next step is installing the clutch pads on the resin parts.

The wiring loon is still not ready. Missing the injectors and wiring. This will be done in the next update. Including more hose clamps and cross tubes between the intake units and cylinder heads.

As assumed all kits were sold out in no time. Merry Christmas to all of you.Best regards, Michael
23/12/2021

As assumed all kits were sold out in no time.

Merry Christmas to all of you.

Best regards, Michael

Hello everyone. I just got the call from the etching company that finally all etching sheets are finished and will be sh...
20/12/2021

Hello everyone.
I just got the call from the etching company that finally all etching
sheets are finished and will be shipped to me tomorrow.
This means that i will probably receive the package shortly after the christmas days next week.

I will accept orders on the 288GTO engine kit starting on 23.12.2021 from 06:00CET (UTC +1)
I WILL NOT ACCEPT ORDERS PRIOR THAT DATE to give everyone the same chances to order the kit.
Be advised that this is a limited production run kit. and i expect that this kit will be sold out quick.

How to order (from 23.12.2021 06:00CET):
1) Orders can be done here; (PM) me on facebook or
2) send me a mail from my website (mail(at)modellbauwerkstatt-trape.de)

Important:
I will send you an order confirmation to make the order official.
If you did not receive this order confirmation within 12hours the order is not confirmed!!!!
if the set is sold out already i will send you a note in any case.

Payment details will be spoked after order confirmation.
I will accept PayPal (world wide) or bank transfer (within EU only)

Shipping
will be done ONLY!!!!! with DHL as insured parcel (incl. tracking).
For overseas i only ship with the "express" option. This is a bit more pricy but this option makes sure the parcel is transported by plane.
(otherwise it is shipped likely with boat and could travel several weeks!!)
I will send the parcels about 1-2 days after receiving the etched parts, due to time needed to seperate the individual frames to each kit and package all sheets.

Merry Christmas to all of you!!!!🎄

...continued WIP on the 288GTO engine.More bits and pieces are coming together. Still missing most of the etched parts. ...
18/12/2021

...continued WIP on the 288GTO engine.

More bits and pieces are coming together. Still missing most of the etched parts.
So all the hose clamps, fuel injector brackets, and throttle unit linkages are still missing. Also the climate compressor mounting needs to wait including all the drive belts.
Same for the engine stand as most of the parts are from etch.
Also missing are the complete wiring looms for both engine banks. This is planned for the next update.

For Info:
Since i am still waiting for the etched parts for the supplier, and i do not think they produce over the holidays, i assume that ordering of the kits needs to wait till early January. I will keep you informed and as soon i hear from the etching company i let you know. :-)

..continued WIP on the 288GTO engine- main engine case finalizing- dry fitting of cylinder headsI completed (more or les...
13/12/2021

..continued WIP on the 288GTO engine

- main engine case finalizing
- dry fitting of cylinder heads

I completed (more or less) the main engine block (missing some small bits and pieces and all the etched parts).
The oil pan needs some patience to fit on all the threaded rods, but worked out in the end. You need to enlarge all the pass through holes to about 2,3-2,4mm. Just work slowly and carefully.

Then i could not resist and did a dry fit of the cylinder heads to check fitment on the main block. Worked out very good. (Missing still the cylinder head gaskets).

Adresse

Ulhaus 70
Langerwehe
52379

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von MWT Modellbauwerkstatt-Trape erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.

Service Kontaktieren

Nachricht an MWT Modellbauwerkstatt-Trape senden:

Teilen

Kategorie


Andere Kunst in Langerwehe

Alles Anzeigen