Coin-Up Pinball

10/05/2025

April was a busy month for us at Coin-Up Pinball.
Along with the final release of our Whitestar Power Driver Board, we have also manufactured some of the smaller, unique boards.
Available now from our distributor Retrocity.com and rtbb.com.au

- Stern/Sega Whitestar Power Driver Board REV-G
- Bally KISS Lamp Board Upgrade
- Twilight Zone 8 High Power Driver Board
- Williams/ Bally Bi-Directional Motor Board
- Williams/ Bally DC Motor Control Board

07/04/2025

Coming very soon... Stern/Sega Whitestar I/O Power Driver Board.

Bulk manufacturing has commenced and will be available mid April from our distributors Retrocity Pinball and RTBB.

Features include...
- Upgraded 4 Layer PCB, improving signal integrity whilst reducing EMI
- High quality gold plated vias and pads
- Every Chip Socketed for Easy Repair (All sockets are TE Connectivity)
- Upgraded Williams style TIP107 lamp drivers to replace the obsolete VN02N SS Relay
- Upgraded encased fuse holders
- Genuine EzSBC PSU5 switching LM323K replacement for the LM338 rectifier
- Shrouded IDC Ribbon Cable Header
- Genuine Japan FRL Relay
- Supports Every Single Game as the Original
- 12 Months Local Warranty
- Designed & Assembled in Australia

15/03/2025

WPC Power Driver Board out now!

100% 1:1 plug and play replacement, compatible with all WPC-89 and WPC-S / DCS machines.

Available from one of our distributors...

Retrocity.com.au
Rtbb.com.au

07/01/2025

3 new Addams Family boards hit the shelves at our distributors
Retrocity.com.au
RTBB.com.au

Our good friend Nino over at RTBB asked us if we could take a look at redesigning the Addams Family Magnet board.
When a transistor fails, it switches the TIP36 on the magnet board, causing the magnet to constantly stay energised.
This not only burns the magnet board, it also burns out the magnet itself, and can even burn the playfield wood.
To combat this issue, we have re-designed the magnet board to incorporate isolated fuses on each transistor circuit.

We produced these in two variations..
1. Original size using smaller 5x20 fuses
2. Extended size using standard 6x32 fuses

Both can be ordered from either of our distributors
RTBB.com.au
Retrocity.com.au

We also decided to reproduce the Flipper Extra power board to pair with our Addams Flipper Controller board.

18/12/2024

Coin-Up Pinball & Retrocity Pinball are thrilled to announce another highly requested PCB in the ever growing line up of new replacement parts for your Pinball machine. Presenting the Bally Williams System 11 CPU/MPU - Supporting all System 11 versions from the Original release right through to A/B/C.
A plug and play direct replacement with all the features from the original with improvements!
Highlights Include:
- Supports Every Single Game as the Original
- NVRAM Included (No Need For Batteries)
- Genuine WDC PIA's
- Original Fujitsu Relay
- Lamp Column transistors have been upgraded to MOSFET’s to reduce heat, and the reset circuitry has been upgraded to use an MCP120 reset generator, which completely removes the flaky Williams reset design.
- Easily switch between the included A and B audio daughter boards for true audio in both variants
- Fully populated audio circuitry, making it backwards compatible with all earlier games
- 10 pin network resistors have been used, along with replacement SRC resistor/cap networks to replicate the original Williams layout.
- Every Chip Socketed for Easy Repair (All sockets are TE Connectivity)
- 12 Months Local Warranty
- Designed & Assembled in Australia
There is so much more included, so please check the website for full details!

Exclusively Available from:
www.retrocity.com.au
www.rtbb.com.au
www.coin-uppinball.com

29/11/2024

⚡️Head over to www.retrocity.com.au for a Black Friday deal and score an incredible 15% OFF on our entire range of Coin-Up Pinball PCBs and Products. No exclusions and no minimum spend. For a limited time only! ⚡️

The Sale has now ended. Thank you to everyone who supported us!

🥳 Our Black Friday Sale is now on! Grab 15% off EVERYTHING in store at www.retrocity.com.au - No code needed, no exclusions and no minimum spend. 🥳

Score a deal on Pin2DMD Colour DMDs for Bally, Williams, Stern, Data East, Sega, Gottlieb and more.
We also have the complete range of Coin-Up Pinball PCBs on sale, including the Stern White Star range of MPU's and many others.

05/11/2024

After extensive testing in all System 11 variants (System 11N, 11A, 11B and 11C), we are excited to announce that the Coin-Up Pinball System 11 MPU is now entering mass production and is planned to ship by early December 2024.

Stay tuned for the full feature set and pricing very soon!

For the full range of products, please check out our Authorised Retailers below:

RTBB - www.rtbb.com.au
Retrocity Pinball - www.retrocity.com.au

03/11/2024

One of the most requested boards to reproduce has now become a reality!
At Coin-Up Pinball, we're determined to produce a plug and play System 11 replacement using all original and genuine components.
High quality parts and perfect audio, as it was intended.
Prototype PCB's have arrived and our work has begun.
Stay tuned...

17/10/2024

Coin-Up Pinball & Retrocity Pinball are super excited to be supporting Project Pinball Charity this year. The following are available to bid on at https://projectpinball.rallyup.com/silen.../Campaign/Details 🎉

🎁1x Stern Whitestar Modified CPU/Sound PCB
🎁1x WPC-89 MPU
🎁1x WPC-S MPU
🎁3x 7 Ball Opto sets for Bally Williams
🎁3x Pin2DMD Standard Size Displays
🎁1x Stern HD Pin2DMD Full Package Display with Speaker LED Kit

(Please note all prices are in USD)

If you're at the Pinball Expo, winning bidders can pick their item up direct or it can be posted. Please see all the details over on the Project Pinball page.

The Stern Whitestar Modified CPU/Sound Board comes with both Blue Dot and Gold Dot PALs so it will work with whatever game you have! All displays will include a colour file of your choice (if available) and all necessary cables and instructions for your machine.

06/10/2024

Our Stern Whitestar 2 / Modified CPU Sound Board is back in stock.

Get yours today! Available exclusively from our Official Partners/Resellers.

Retrocity Pinball - www.retrocity.com.au
RTBB - www.rtbb.com.au

07/09/2024

Coin-Up Pinball is excited to announce that we will be sponsoring Pinfest 2024! 🥳
You can find all the details below! 👇
Facebook: Pinfest - Newcastle Pinball Association
Location: Club Macquarie, 458 Lake Road, Argenton. Main Auditorium, Mountain View Room & Seminar Room #1
Date: 14th - 15th September 2024
Website: www.pinfest.com.au

Are you “Game” enough to attend?

29/07/2024

Our Brand New Stern Whitestar 2 / Modified CPU Sound Board is Available NOW!

Get yours today exclusively from one of our Official Resellers!

Retrocity Pinball - www.retrocity.com.au
RTBB - www.rtbb.com.au